42,543 +

Shield Donations to Date

RISING TO THE CHALLENGE

SUPPORTING THE FIGHT AGAINST COVID-19

The packaging industry has the capability of producing massive volumes of products. Through the innovation of engineers and the utilization of packaging technology, we have the capability to create much-needed face shields for communities across the nation.

About Our Face Shields

About

Pharmaworks Face Shields

Pharmaworks, located in Odessa, Florida, has worked around the clock to refine different designs of a rapidly producible face shield. Working together with the international community, we have created a solution that meets hospital requests and is test lab-verified for compliance.


The resulting rigid frame can be cleaned and reused providing much-needed personal protective equipment.

Where We Can Go

30,000 Face Shields per Day

A single Pharmaworks TF2 thermoformer can produce over 30,000 face shields per day.


The process can immediately scale and produce more than 60,000 face shields per day with an adequate supply of material.

Pharmaworks is proud to have teamed up with iQuest, Inc. to co-develop this solution.

Features and Specs

A Rapidly Scalable Model

Simple.

Scalable.

Open Source.

There is no secondary assembly process. Recipients simply snap the replaceable front shield onto the reusable frame.

We can ship dies and hole punches to customers who already own original Pharmaworks blister machines, or upgraded machines, to produce face shields.

Die-cut sheets and frame designs are available to the open-source community which is very active in helping with donations. 

Please Note

The Pharmaworks Face Shield has not been FDA cleared or approved. The Pharmaworks Face Shield has been authorized by FDA under an EUA for use by healthcare providers as personal protective equipment. This Pharmaworks Face Shield is only authorized for the duration of the declaration that circumstances justifying the authorization of emergency use under Section 564(b)(1) of the Act, 21 USC 360bbb-3(b)(1) unless the authorization is terminated or revoked sooner.

Need Face Shields?

Order

Ready to Order Now?

Available for Purchase

Pharmaworks has donated the majority of complete shields manufactured to date and is continuing to do so based on available inventory. Die cut shield blanks continue to be donated/shipped to support the nation's maker community. 

Specifications

We have worked with healthcare professionals and test labs to create a face shield that can be used by the medical community. Download the datasheet for further information.

Reusable after Cleaning

ANSI Z87.1-2015 Certified

The Process

Want to See More?

View the Manufacturing Process

Watch Peter Buczynsky, Vice President and General Manager of Pharmaworks, provide a walkthrough of the entire process. Pharmaworks has invested over $50,000 to date in material, laser cutters, die cutters, molds, and labor to allow this effort to take place. 

Contact Us

Donation Requests

Items Available for Donation

*For Organizations and Essential Workers, Based on Availability

Full Face Shield 

(Acrylic)

Blank (no holes punched) Die-Cut Sheets 

For use on other Frames

Fill out the form below and select one of these options in Requested Items for donations.

Please check spam or junk email folders for communication from us.

Are You a Maker?

Supply Your Community

Provide Shields to Your Community

Passing It On: Free Die-Cut Face Shields

Due to the generous donations by our customers and film suppliers of this hard to find film, we are die cutting face shields and supplying the nation’s maker communities that are 3D printing shield frames and donating PPE where they are most needed.

We Want to Help You!

Blank (no holes punched) Die-Cut Sheets  For use on other Frames

Specifications:

8.5" x 12" typical

10-12 mil PVC

Die Cut with Radius Corners

By providing you with our Face Shields we have a few requests.

  1. Please tag us #pharmaworks #pwfaceshield in any social media about frames donated that use our Face Shields such as Facebook and LinkedIn. 
  2. We have the right to use any photos and info about PPE you make using our Face Shields in Pharmaworks marketing.
  3. Pharmaworks can not be held liable for any COVID-19 exposure that happens while wearing our Face Shield. The Pharmaworks Face Shield has not been FDA cleared or approved. The Pharmaworks Face Shield has been authorized by FDA under an EUA for use by healthcare providers as personal protective equipment. This Pharmaworks Face Shield is only authorized for the duration of the declaration that circumstances justifying the authorization of emergency use under Section 564(b)(1) of the Act, 21 USC 360bbb-3(b)(1) unless the authorization is terminated or revoked sooner.

Want to Help?

Donation & Supply

We Need Your Help

Donations vs Purchases

We want to make sure we can donate face shields to those who need them. Pharmaworks has invested in equipment, materials, and labor but we still need your help. Purchasing frames help us offset our expenses and allows us to keep the effort going. When you do, you help others get much needed personal protective equipment. All donated materials are only used for donations.

Provide Shields to YOUR Community.

Help Us Find Materials.

If you donate material, we will die cut the shields and send them back so you can distribute them to your community.

  • If you are interested in providing complete face shields for your local community with your donated material, we will die-cut sheets for free and only charge for frames.
  • You are welcome to apply your own labels to face shields when you provide the material; we can even place them on the product upon request.
  • We ask that you donate any remaining material so we can continue to distribute.

Face shield material is on backorder all across the world. We request you to please check within your organization and reach out to your associated partners to see what material may be available. You will serve an immense role and potentially save lives with our medical professionals on the front lines.


Desired Material Specifications

  • Type: PETG or PVC
  • Material Thickness: 7-20 mil
  • Roll Width: 225-320 mm (9" - 12.5")
  • Don't worry, larger rolls can be slit.

FEEDBACK

Pasco County, FL Sheriff's Office

Medical Professional

What People
are Saying

“We Fight as One,” means coming together and working as a community, and we see that each and every day here in Pasco County through acts of kindness, generosity and support such as yours.

They have full coverage. I feel they are better...there is no foam that can't be cleaned.These can be completely wiped down...

People

Volunteers Supporting the Effort

Copyright © 2020. All rights reserved.